Brandt BS2510SW Manuel D'instruction page 26

Tool required: Philips screwdriver, Flat bladed screwdriver,
Hexagonal spanner.
Ensure the unit is unplugged and empty.
Ÿ
To take the door off, it is necessary to tilt the unit backwards. You
Ÿ
should rest the unit on something solid so that it will not slip during
the door reversing process.
All parts removed must be saved to do the reinstallation of the
Ÿ
door.
Do not lay the unit flat as this may damage the coolant system.
Ÿ
It's better that 2 people handle the unit during assembly.
Ÿ
1.Remove two screws at rear side of top cover.
2.Remove top cover and place it aside.
9