Storage; Disposal; What If There Are Problems; Technical Data - Beurer HD 50 Mode D'emploi

CAUTION
• Do not use pegs or similar items to attach the electric overblanket to the clothes horse. Failure to do
so may damage the electric overblanket.
• Do not reconnect the controller to the electric overblanket until the plug-in connector and electric
overblanket are completely dry. Failure to do so may damage the electric overblanket.
WARNING
• Never switch the electric overblanket on to dry it! Otherwise there is a risk of electric shock.

6. Storage

If you do not plan to use the electric overblanket for a long period of time, we recommend that you store it in
the original packaging. For this purpose, disconnect the controller from the electric overblanket by unplug-
ging the plug-in coupling.
CAUTION
Allow the electric overblanket to cool down before folding. Otherwise the electric overblanket may be
damaged. Do not crease the electric overblanket by placing items on top of it during storage.

7. Disposal

Please dispose of the device in accordance with EC Directive – WEEE (Waste Electrical and Elec-
tronic Equipment). If you have any queries, please contact the appropriate local authorities.

8. What if there are problems?

Problem
The indicator lamp is not illuminated while
- the controller is properly connected to the electric
overblanket
– the mains plug is connected to a working socket
- the sliding switch for ON/OFF and temperature settings
is set to 1, 2, 3, 4, 5 or 6

9. Technical data

See the type plate label on the electric overblanket.
Cause
The safety system has
switched the electric
overblanket off perma-
nently.
14
Solution
Send the electric
overblanket and
the controller for
servicing.