König Electronic SEC-DUMMYCAM50 Mode D'emploi page 2

CCTV DUMMY CAMERA
Introduction:
CCTV dummy dome camera. Professional design for the image of security. With built-in flashing LED.
• We recommend you read this manual before installing/using this product.
• Keep this manual in a safe place for future reference.
Packaging content:
• CCTV dummy camera
• Mounting screws and plugs
• Manual
Specifications:
• Housing: plastic
• IP protection: Indoor use
• Battery: 2 x 1.5 V AA battery (not included)
• Dimensions: 73 x 118 mm
• Weight: 142 g (without batteries)
Insert the batteries to activate the flashing LED:
1. Remove the battery compartment at the
backside of the camera.
2. Insert 2 x AA 1.5V battery into the battery
compartment and correctly match the
polarity markings (+ and -), to activate the
flashing LED.
Close the battery compartment after
inserting the batteries.
Maintenance:
Clean the housing with a dry or damp cloth.
Do not use cleaning solvents or abrasives.
ENGLISH
2