Stahl 7571/11 Instructions De Service page 23

6.2 Fitting
If deployed outdoors / where exposure to the elements is the case, it is recommended to
fit the enclosure with a protective roof or wall.
To prevent contamination of the plug pins, a fitted protective cap can be used (Order No.
see Accessories).
Installation of Type 7571/11
Application position: hinged cover downward, terminal chamber upward.
• Vertically mount wall-mounting socket Type 7571/11 with four screws to the application
position on an evenly surfaced wall. (for mounting dimensions, see the dimension
sketch or the reverse side of device)
• The mounting holes are oblongly-shaped slots. These holes facilitate correct vertical
and horizontal mounting.
Installation of Type 7571/12
Application position: In the unplugged state, the plug should be stored hanging with the
contact pins oriented downward.
6.2.1 Auxiliary contacts" installation set
Installation
• Auxiliary contacts can either
be snapped into the left or
right socket.
• If desired, both sockets can
be equipped with contacts.
Figure 6-3:
Installation of auxiliary contacts
Wall-mounting socket Type 7571/11 and plug Type 7571/12
Arrangement and fitting
21