Step 2 Installing The Unit - Sony VPL-VW570ES Guide De Référence Rapide

Masquer les pouces Voir aussi pour VPL-VW570ES:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24
Step 2
1
Position the unit so that the lens is
parallel to the screen.
2
After connecting the AC power cord to
the unit, plug the AC power cord into
a wall outlet.
Rear of the unit
Front of the unit
Note
After connecting the AC power cord to the
unit, the ON/STANDBY indicator may
blink in orange.
You may not be able to control the unit
while the indicator is blinking, but this is
not a malfunction. Wait until it stops
blinking and remains lit in red.
Installing the Unit
Lights in red.
3
Press the ?/1 (ON/STANDBY) button
to turn on the unit.
Front of the unit
4
Project an image on the screen, then
adjust the focus, size, and position.
VPL-VW570ES
a Adjust the focus.
Press the LENS ADJUSTMENT
(FOCUS) button to display the Lens
Focus adjustment window (test pattern).
Then adjust the focus of the picture by
pressing the M/m/</, buttons.
b Adjust the picture size.
Press the LENS ADJUSTMENT
(ZOOM) button to display the Lens
Zoom adjustment window (test pattern).
Then adjust the size of the picture by
pressing the M/m/</, buttons.
Flashes in green for
tens of seconds and
then lights in green.
13
GB

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Vpl-vw270es

Table des Matières