Akai Professional Rythm Wolf Guide D'utilisation page 7

Transport Control
Rhythm Wolf's Play/Stop button operates differently depending on its Sync setting (Step
Switch 13).
When set to Internal:
•
Press the Play/Stop button to start or stop playback.
•
Press the Velocity and Play/Stop buttons at the same time to start playback from the
very beginning of the pattern rather than from the current position.
•
When Rhythm Wolf's MIDI Out/Thru is set to Out, it will send MIDI Start, Stop, Continue,
Clock, and SongPosPtr=0 depending on its transport state.
•
Rhythm Wolf's Gate Trig Out will pulse each time it advances one step.
When set to External or USB:
•
Rhythm Wolf's playback will respond to incoming MIDI Start, Stop, Continue, Clock, and
SongPosPtr=0 messages.
•
Rhythm Wolf's transport controls will not function.
When set to Gate:
•
Press the Play/Stop button to start/resume or stop playback.
•
Rhythm Wolf's time division can be set only to 1/8 or 1/16:
When set to 1/8, two pulses will advance playback by one step.
o
When set to 1/16, one pulse will advance playback by one step.
o
•
Rhythm Wolf's Gate Trig Out will mimic its Gate Trig In.
7