Maintenance - BORETTI BPM-60 Notice D'emploi

Maintenance

Dismantling the Oven Door
It is easy to remove the door from your Boretti
Open the oven door completely. Move the fi tted
Close the door halfway. Without using force,
Attaching the door is done in reverse order.
However, you must make sure that the little
slots underneath the bracket fi t onto the frame
of the range cooker. This may take some prac-
tice.
Removing the Inside Panels from the Oven
In order to remove the inside panels from the
oven, follow these steps:
oven cavity
There are two large screws that you can
unscrew on the sides, after which the side pa-
nels can be easily removed.
Cleaning the Oven Cavity
Wait until the oven has cooled down complete-
ly, then clean it with lukewarm water and a mild
cleaning agent. Never use knives, steel–wool
pads or other abrasive products or objects for
cleaning purposes. This might damage the fi -
nish on the
inside of your oven. Make sure that food spills
are removed after every cooking session, in
order to prevent damage. An additional advan-
tage of regular cleaning is that there will be
fewer unpleasant odours the next time you use
the oven.
56
Fig. 3
Fig. 4