Controls And Functions; Operating The Device; Turning The Extraction On And Off - Novy Vision 7830 Mode D'emploi

ENVIRONMENTAL PROTECTION
Tips for saving energy
The new appliance is exceptionally effi cient and econom-
ical with energy. Some tips follow below for making your
appliance even more energy-effi cient.
− Switch the appliance on at the lowest speed when you
start cooking to adjust the relative humidity and eliminate
cooking odours.
− Only use the highest speed when absolutely necessary.
− Only increase the speed of the appliance when the quan-
tity of vapour so requires.
− Keep the appliance fi lter/fi lters clean to optimise grease
and odour fi ltering effi ciency.
− Switch to higher power in good time if much vapour is
released. This is more effi cient than using the appliance
for a long time, and catching vapour already spread in
the kitchen.
− Do not allow the appliance to unnecessarily ventilate
after cooking.
− Switch the lighting off when leaving the kitchen or if the
kitchen is already light enough.
− Ensure adequate air supply in the room, so that the
appliance can operate effi ciently and economically.
− Put lids on the pots to reduce cooking vapours and
condensation.
Recycling the transport packaging and the old ap-
pliance
This appliance is protected against damage
during transport by packaging. The materials
used are not harmful to the environment and
are suitable for recycling. Ensure environment-
ally-friendly disposal of the packaging. Your
appliance also contains many materials that
can be recycled.
For this reason, used appliances should be separated
from other waste. Recycling of old appliances arranged by
your manufacturer will in this way be carried out under the
best circumstances. For recycling your appliance, we refer
you to the recent European guidelines in force concerning
electrical and electronic waste. Ask your municipality or
your salesperson about the closest collection point for
your old appliance.
Keep old appliances out of the reach of children.
Recycling batteries
Do not put batteries into the standard household refuse.
Ask your municipality or your salesperson about the
closest battery collection point. Keep batteries out of the
reach of children.

2 CONTROLS AND FUNCTIONS

2.1 Operating the device

2.1 Operating the device
1
Switch on / off
2
Decrease speed level
3
Increase speed level
4
Illumination
5
Indication lights green speed 1,2,3
6
Indication light red Power mode

2.2 Turning the extraction on and off

Turning the extraction on off
Press button 1 to turn on the extractor. The extractor
always starts in the function last used (lighting and/or motor).
Turning the extraction off with delay mode
To set delay mode press key
The fi rst indicator light fl ashes, the other indicator lights
come on at the last position set. After 10 minutes the motor
and lighting automatically switch off.
The delay time is set by default to 10 minutes in extraction
mode. It is advised to always fully allow this function to work.
Switching extraction off without delay mode
Press key twice.
1
Extractor power level
To increase the power level press key
– 29 –
once.
1
.
3