Switch Led Lamps On/Off; Stopping The Vehicle - Reely Black Commando Notice D'emploi

j) Switch LED Lamps On/Off
The LED lights of the vehicle are tuned on or off by means
of a switch.
The switch is located on the upper part of the chassis plate
(see marking in image on the right).
k) Stopping the Vehicle
To stop driving, proceed as follows:
• Let go of the throttle/brake lever on the transmitter so
that it goes into neutral position, and let the vehicle run
out.
• After the vehicle has stopped, the speed controllers
switch off (switch position „OFF", see figure on the right.
Never touch the wheels or the drive mechanism, and
make sure you do not move the throttle/brake lever at
the transmitter! Do not hold the vehicle at its wheels!
Attention!
The motor, the speed controller and the drive battery get hot during operation! Do not touch these parts
immediately after operation. Danger of burns!
• Disconnect the drive battery from the speed controller. Disconnect the plug-in connection completely.
• Now you may turn off the transmitter.
47