Sony HT-A7000 Mode D'emploi page 2

Owner's Record
The model and serial numbers are
located on the rear of the bar speaker.
Record the serial number in the space
provided below. Refer to them
whenever you call upon your Sony
dealer regarding the speaker system.
Model No. HT-A7000
Serial No.
WARNING
To reduce the risk of fire or electric
shock, do not expose this speaker
system to rain or moisture.
The speaker system is not disconnected
from the mains as long as it is connected
to the AC outlet, even if the speaker
system itself has been turned off.
To reduce the risk of fire, do not cover
the ventilation opening of the speaker
system with newspapers, tablecloths,
curtains, etc.
Do not expose the speaker system to
naked flame sources (for example,
lighted candles).
To reduce the risk of fire or electric
shock, do not expose this speaker
system to dripping or splashing, and do
not place objects filled with liquids, such
as vases, on the speaker system.
As the mains plug is used to disconnect
the speaker system from the mains,
connect the speaker system to an easily
accessible AC outlet. Should you notice
an abnormality in the speaker system,
disconnect the mains plug from the AC
outlet immediately.
Do not install the speaker system in a
confined space, such as a bookcase or
built-in cabinet.
2
US
CAUTION
Risk of explosion if the battery is
replaced by an incorrect type.
Do not expose batteries or appliances
with battery-installed to excessive heat,
such as sunshine and fire.
Do not place this product close
to medical devices.
This product (including accessories) has
magnet(s) which may interfere with
pacemakers, programmable shunt
valves for hydrocephalus treatment, or
other medical devices. Do not place this
product close to persons who use such
medical devices. Consult your doctor
before using this product if you use any
such medical device.
For the network connection of the
speaker system, establish the
connection via the router or LAN port
with the router function. If these
connections are not established, a
security problem may occur.
Do not apply strong shock to the
speaker system
Do not apply strong shock or excessive
force to the speaker system.
It may cause injury by chipping or
cracking of the speaker system that is
made of glass material. If chipping or
cracking occurs, immediately
discontinue use, and make sure not to
touch the damaged part.
Indoor use only.
For customers in the U.S.A.
NOTE:
This speaker system has been tested
and found to comply with the limits for a
Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference
in a residential installation. This speaker
system generates, uses and can radiate
radio frequency energy and, if not