Display; Displays During Operation; Loading The Batteries - Denon DVM-2815 Mode D'emploi

Dvd audio-video auto changer
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

FUNCTIONAL OVERVIEW

Display

Stays on when repeat
title function is on.
Stays on when
the repeat function is on.
Stays on when
the A-B repeat
function is on.
Stays on when the inserted
disc is being played back.
Displays how long a current title or track has been
played back. When a chapter or track has switched,
the number of a new title, chapter or track is displayed.

Displays During Operation

Power on
No disc inserted
Tray open
Tray closed
Loading the Disc
Power off
Tray rotation
AC cord plugged in
Lights up when the
Lights up when a
inserted disc comes
playback control
to a pause.
is activated.
– 11 –
Stays on when repeat chapter function is on.
Stays on when repeat track function is on.
Lights up when a DVD is inserted into the tray.
(The DVD AUDIO indicator also appears when
playing a DVD-Audio disc.)
1
2
The playing disc number flashes on.
3
4
5
CD:
Lights up when a CD is inserted into the tray.
VCD:
Lights up when a Video CD is inserted into the tray.

Loading the Batteries

1. Open the battery compartment cover.
2. Insert two "AA" (R6P) batteries, with
each one oriented correctly.
3. Close the cover.
NOTES
• Do not mix alkaline and manganese batteries.
• Do not mix old and new batteries.
Cautions On Batteries
• Use "AA" (R6P) batteries in this remote control unit.
• Replace the batteries with new ones approximately
once a year, though this depends on the frequency
with which the remote control unit is used.
• If the remote control unit does not operate from
close to the main unit, replace the batteries with
new ones, even if less then a year has passed.
• The included battery is only for verifying operation.
Replace it with a new battery as soon as possible.
• When inserting the batteries, be careful to do so in
the proper direction, following the
in the remote control unit's battery compartment.
• To prevent damage or battery fluid leakage:
• Do not use a new battery with an old one.
• Do not use two different types of batteries.
• Do not short-circuit, disassemble, heat or dispose
of batteries in flames.
• Remove the batteries when not planning to use the
remote control unit for a long period of time.
• If the batteries should leak, carefully wipe off the
fluid from the inside of the battery compartment,
then insert new batteries.
and
marks
EN

Publicité

Table des Matières
loading

Table des Matières