Saeco MEGACOLD S Notice Originale page 68

MEGACOLD S/M – Issue 01
Command 26 Child-proof system activation: This command allows you, by means of an electrical contact,
to manage a childproof device when it is fitted on the machine. Step one: enabling control of the childproof
device is requested. Value 1 = enabled; value 0 = not enabled. Step two: the system asks which selections
must be subject to sales restrictions.
ELECTRICAL CONNECTION OF THE CHILDPROOF DEVICE: The connection must be made between a
normally-open contact of the childproof device and the 2 pins of connector JP5 connector on the main board,
shown in the figure.
Main board
Use connector type AMP Modu II 1x12 pin cod. 280514-0, Pin AMP Modu II female cod. 182206-2
for the connection.
Pin 8
Pin 11
Detail of connector JP5
23
E
N
G
L
I
S
H