Saeco MEGACOLD S Notice Originale page 67

22
Command 08 Displays sales for selection discounted price:
Use this command to enter the submenu to display the number of sales per selection with full price. The
display shows 'Selection number 00'. Key in the code identifying the selection of which you want to know the
data of sales and press ENTER to display the requested value. Press the pushbutton ESC to return to the
submenu from which it is possible to display the number of sales regarding another selection by repeating the
above said procedure. Press pushbutton ENTER a second time to return to the main menu.
N.B.: With SPIRALI SLAVE connection enabled (see command 49), once the settings for the MASTER
machine have been completed, access is gained to the setting mode for the same parameters relevant to the
SLAVE machine by simply pressing the A (ESC) button
Command 09 Displays totals cashed not clearable:
Use this command to display the totals regarding the transactions carried out from the initialization of the
machine. The available data are the following:
Total sold, tot. in counter, tot. in tubes, tot. banknotes, tot. given back, tot. given out manually by the tubes,
E
tot. cashed overprice, tot. discounted sales, tot. sales with system cash less, tot. sold with exact amount, tot.
N
cashed without sales, number of sales carried out, total value of the free vends, total number of the free
G vends.
L
I
Command 10 Displays totals clearable:
S This command has the same functions as command 09, but it can be cleared through command 92.
H
Command 11 Setting the selection sequences :
The function of this command is to set the dispensing of the same type of product in order to obtain a uniform
and progressive emptying of the tray, irrespective of the customer's choice.
Initially the command asks the operator to enable (option 1) or disable (option 0) the function.
If the option is active (1) the system asks the operator to enter the first selection that forms the sequence,
then asks the operator to assign a product code and price. Confirm each time by pressing ENTER. Add the
remaining selections that are part of the same sequence . Press ESC to conclude and confirm the first
sequence. At this point, another sequence may be entered, or exit the command by pressing ESC a second
time.
Command 15 Concatenated menus
WHAT THEY ARE FOR:
concatenated menus are for selling groups of products (up to a maximum of 3) while entering a single
selection.
There are two ways of programming these groups of products. These ways are defined as:
1. precomposed menu
2. menu to compose
Example of "precomposed menus":
Step 1: the system asks for the functionality to be enabled: 1 = enabled; 0 = not enabled.
Step 2: if the system is enabled, the request to name the new menu numerically will appear on the display.
The numbers from 81 to 89 are available. At this point the system asks you to enter the full price followed by
the discount price.
Step 3: the system asks you to select the first group. Enter the selection number and confirm with button "B"
(enter); then press "A" (esc) and the system will ask you to enter the selection of the second group. Enter the
selection number and confirm with button "B" (enter); then press "A" (esc) and the system will ask you to
enter the selection of the third group. Enter the number of the selection and confirm with button "B" (enter). At
this point the system will ask you to enter the second menu (e.g. 82, as the numbers available run from 81 to
89).
Example of a "menu to compose":
Step 1: the system asks for the functionality to be enabled: 1 = enabled; 0 = not enabled.
Step 2: if the system is enabled, the request to name the new menu numerically will appear on the
display.The numbers from 81 to 89 are available. At this point the system asks you to enter the full price
followed by the discount price.
Step 3: unlike the "precomposed menu", several selections can be entered for each group in the case of a
menu to be composed. It is possible to enter up to three selection groups. As a result end-users will be able
to choose from several products to form their menu.
NOTES: the operation of the photocells will be excluded when you enable the menu selections from 81 to 89.
MEGACOLD S/M – Issue 01