Assemble The Plane - ACME Zoopa Glider 75 Manuel D'utilisation

zoopa Glider 75

Assemble the Plane

1
Install the servo horn of the vertical and horizontal tail by screw.
2
Cut out the foam of the hole in the end of the tail.
3
Insert the horizontal tail to the
corresponding gap of the tail.
5
Fix the tail by a long corresponding screw.
4
Connect the push rod wire with the
control surface of the vertical and
horizontal tail by the clevis.
16
6
Insert the wing to the corresponding
hole of the fuselage. Make sure the wing
is fi x vertically with the fuselage.