Center Of Gravity - ACME Zoopa Glider 75 Manuel D'utilisation

!
In the RTF version the aileron is not supported by the controller as it comes with 3 channels only.
7
Install the servo horn of the aileron by screw.
8
Connect the push rod to the aileron horn and make sure the ailerons are balanced.

Center of Gravity

The ideal C.G. position is 30 mm behind the leading edge measured at where the wing meets the fuselage. The C.G. has a great effect on
the way of the model fl ight.
Install the aileron (4-CH)
3 cm
17
zoopa Glider 75
9
The plane fully assembled as shown in
the fi gure.