Husqvarna 436 Li Manuel D'utilisation page 10

nearer you the chain brake engages manually by your
left hand.
Use the chain brake as a parking brake when you start
the product and when you move short distances. This
decreases the risk that you or a person near you get hit
by the saw chain.
Pull the front hand guard rearward to disengage the
chain brake.
A kickback can be very sudden and intense. Most
kickbacks are small and do not always engage the chain
10
brake. If a kickback occur when you use the product,
hold tight around the handles and do not let go.
The front hand guard also decreases the risk to hit the
saw chain if your hand lets go of the front handle.
In the felling position you can not engage the chain
brake manually. The chain brake can in this position
only be engaged by the inertia release mechanism.
Power trigger lockout
The power trigger lockout prevents accidental operation
of the power trigger. If you put your hand around the
handle and press the power trigger lockout (A), it
releases the power trigger (B). If you release the handle,
the power trigger and the power trigger lockout move
back to their initial positions.
A
B
481 - 001 - 22.01.2018