4 • Dry ironing
5 • Steam ironing
6 • Burst of steam
7 • Vertical shot of steam
8 • Spray
9 • Anti-Drip system
This prevents water escaping from the soleplate when the temperature is too low.
10 • Automatic electronic 3-position auto-off*
If, although switched on, the appliance is not moved, it will automatically switch off and the
auto off light will blink after the following intervals:
- After 30 sec., if the iron is left resting on the soleplate or lying on its side.
- After 8 mins., if the iron is left resting on its heel.
To switch the iron back on, move the iron gently.
* depending on model
Set the variable steam control to
and set the temperature to suit the type
of material (care points •, ••, •••).
You can steam iron from temperature setting •• upwards.
Steam function* : The steam level can be set from between •
(minimum steam quantity) and
We recommend setting to maximum steam quantity
the iron is at temperature setting •••.
(from temperature setting •• upwards)
Press the burst of steam button
to generate a powerful jet of steam.
Wait a few seconds between each shot
before pressing the button again.
(from temperature setting •• upwards)
TIP Hold the iron 4 to 8 inches away from the garment to avoid bur-
ning delicate fabrics.
Hold the iron in the vertical position and press the burst of steam button
to remove creases from suits, jackets, skirts, hanging curtains etc.
IMPORTANT Never direct the steam at persons or animals!
Press the spray button
to dampen stubborn creases.
(maximum steam quantity).
6
only when