Milwaukee M18 ONEFHIWF1 Notice Originale page 11

Masquer les pouces

page de 53

/ 53
Signets

Temperatures in excess of 50°C (122°F) reduce the performance of

the battery pack. Avoid extended exposure to heat or sunshine (risk of

overheating).

The contacts of chargers and battery packs must be kept clean.

For an optimum life-time, after use, the battery packs have to be fully

charged.

To obtain the longest possible battery life remove the battery pack from

the charger once it is fully charged.

For battery pack storage longer than 30 days:

Store the battery pack where the temperature is below 27°C and away

from moisture

Store the battery packs in a 30% - 50% charged condition

Every six months of storage, charge the pack as normal.

BATTERY PACK PROTECTION

In extremely high torque, binding, stalling and short circuit situations

that cause high current draw, the tool will vibrate for about 2 seconds

and then the tool will turn OFF.

To reset, release the trigger.

Under extreme circumstances, the internal temperatur of the battery

could become to high. If this happens, the battery will shut down.

Place the battery on the charger to charge and reset it.

TRANSPORTING LITHIUM BATTERIES

Lithium-ion batteries are subject to the Dangerous Goods Legislation

requirements.

Transportation of those batteries has to be done in accordance with

local, national and international provisions and regulations.

• The user can transport the batteries by road without further

requirements.

• Commercial transport of Lithium-Ion batteries by third parties is

subject to Dangerous Goods regulations. Transport preparation and

transport are exclusively to be carried out by appropriately trained

persons and the process has to be accompanied by corresponding

experts.

When transporting batteries:

• Ensure that battery contact terminals are protected and insulated to

prevent short circuit.

• Ensure that battery pack is secured against movement within

packaging.

• Do not transport batteries that are cracked or leak.

Check with forwarding company for further advice

MAINTENANCE

Refer to the ONE-KEY App for information regarding necessary

servicing.

Use only Milwaukee accessories and spare parts. Should components

need to be replaced which have not been described, please contact

one of our Milwaukee service agents (see our list of guarantee/service

addresses).

If needed, an exploded view of the tool can be ordered. Please state

the machine type printed as well as the six-digit No. on the label and

order the drawing at your local service agents or directly at: Techtronic

Industries GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany.

SYMBOLS

CAUTION! WARNING! DANGER!

Remove the battery pack before starting any work on the

machine.

Please read the instructions carefully before starting the

machine.

ENGLISH

Do not swallow the coin cell battery!

Do not dispose electric tools, batteries/rechargeable

batteries together with household waste material.

Electric tools and batteries that have reached the end of

their life must be collected separately and returned to an

environmentally compatible recycling facility.

Check with your local authority or retailer for recycling

advice and collection point.

No-load speed

IPM

Impact range

Volts

Direct current

European Conformity Mark

Ukraine Conformity Mark

EurAsian Conformity Mark

TECHNISCHE DATEN

AKKU-SCHLAGSCHRAUBER

Produktionsnummer ................................................................................

Leerlaufdrehzahl ..............................................................

Schlagzahl .......................................................................

Drehmoment ....................................................................

Leerlaufgeschwindigkeit ..................................................