Agilent Technologies TwisTorr 74FS AG Rack Mode D'emploi page 262

17 Technical Information
Programming
Figure 36
Mode Menu

262/300
MODE
HIGH SPEED ADJ
PUMP SETTING
INPUT / OUTPUT
SETPOINT
R1/R2 TRESHOLD
R1 SETTING
SETPOINT
R2 SETTING
GAUGE
SERIAL
Flow 1/6
Menu structure
MODE: permits selection (see Flow 1/6) of the operating
mode of the controller from those indicated below:
FRONT: accepts commands from the front panel

REMOTE: accepts commands from the remote input

connector
SERIAL: accepts commands from the serial interface (or

Profibus interface if present)
PROFIBUS: this operating mode is present only if the

Profibus interface is installed on the controller
TwisTorr 74 FS AG Rack Controller User Manual / 87-901-055-01
FRONT
REMOTE
SERIAL
PROFIBUS
F. 2
START MODE
F. 4
PRESSURE UNIT
BAUD RATE
F. 6
F. 3
F. 5