LENCO DVP-1064BK Mode D'emploi page 20

Option
To access the Menu, press SETUP and select [Option]. The menu provides options to adjust the OSD
Language, Subtitle Language and Audio Language. Select an option and press RIGHT/LEFT to adjust
the setting. Press EXIT to exit The Menu.
OSD Language
Select an OSD language.
Audio Language
Select the preferred audio language for watching TV channels. If the language is not available, the
default program language will be used.
Subtitle Language
Select the preferred subtitle language.
Digital Audio
Set the desired audio format at the HDMI slot: PCM, Raw HDIM On, Raw HDMI Off, Off (if available).
System Setting
To access the Menu, press SETUP and select [System].The menu Provides options to adjust the system
settings. Press the UP/DOWN key to select an option and press RIGHT/LEFT to adjust the setting.
Press EXIT to exit the Menu.
Set Password
Set or change the password for Locked programs. Enter your old Password or the default password
'000000'. You will then be asked to enter your new password. To confirm re-enter your new password.
Once it is confirmed, press EXIT to exit the Menu.
Master password '888888'
19