HC302D, HC502D
2.2
Operating the device safely
D
DANGER!
• Do not touch exposed cables.
!
CAUTION!
• Before starting the device, ensure that the power supply line and the
plug are dry.
A
NOTICE!
• Do not use electrical devices inside the cooling device unless they are
recommended by the manufacturer for that purpose.
• Do not place it near naked flames or other heat sources (heaters, direct
sunlight, gas ovens etc.)
• Danger of overheating!
Always ensure sufficient ventilation so that the heat generated during
operation can dissipate. Make sure that the device is sufficiently far
away from walls and other objects so that the air can circulate (fig. 3,
page 4).
• Ensure that the ventilation vents are not covered.
• The device shall not be exposed to rain.
• Never immerse the appliance in water.
• Protect the appliance and power cable against heat and moisture.
• Make sure that the stored substances do not touch the walls of the
cooling area.
3
Scope of delivery
Quantity
Description
1
Refrigerator
1
Handle
1
Installation and operating manual
EN
Scope of delivery
13