Hilti UD 16 Mode D'emploi page 7

Do not use the power tool where there is a risk of fire or explosion.
2.2 Chuck
Keyless chuck or
Key chuck with key
2.3 Switches
Control switch with electronic speed control
Lockbutton for sustained operation
Function selector switch
Forward / reverse switch
2.4 Grips
Vibration-absorbing side handle with depth gauge
Vibration-absorbing grip
2.5 Possible applications
UD 16
Applications
Drilling in metal
Drilling in wood
Driving
Mixing dispersion paint, thin ce-
ment mortar, tile adhesive and plas-
ter with mixing paddles
UD 30 applications
Applications
Drilling in metal
Drilling in wood
Driving
Insert tool type
Drill bits with smooth
shank
Stepped drill bits
Twist drills
Forstner drill bits
Hole saws
Auger bits
Flat bits
(not self-cutting)
Drywall screws
Frame anchors (HRD)
Universal anchors
(HUD)
TE‑MP 80
TE‑MP 110
Insert tool type
Drill bits with smooth
shank
Stepped drill bits
Twist drills
Forstner drill bits
Hole saws
Auger bits
Flat bits
(not self-cutting)
Drywall screws
Drill bit sizes, 1st
gear
Max. 13 mm (½")
Max. 35 mm (1³/₈")
Max. 30 mm (1³/₁₆")
Max. 40 mm (1⁹/₁₆")
Max. 80 mm (3⁵/₃₂")
Max. 30 mm (1³/₁₆")
Max. 40 mm (1⁹/₁₆")
6/300 mm (¼ x 12")
10/50 ‑ 120 mm
(³/₈ x 2 to 4¾")
12/60 mm (½ x 2³₈")
Recommended
Recommended
Drill bit sizes, 1st
gear
Max. 13 mm (½")
Max. 35 mm (1³/₈")
Max. 25 mm (1")
Max. 40 mm (1⁹/₁₆")
Max. 50 mm (2")
Max. 20 mm (¾")
Max. 30 mm (1³/₁₆")
6/60 mm (¼ x 2³/₈")
Drill bit sizes, 2nd
gear
Max. 6 mm (¼")
Max. 10 mm (³/₈")
Max. 30 mm (1³/₁₆")
Max. 40 mm (1⁹/₁₆")
Max. 40 mm (1⁹/₁₆")
-
Max. 40 mm (1⁹/₁₆")
-
-
-
Recommended
-
Drill bit sizes, 2nd
gear
1.5...8 mm (¹/₁₆" to
⁵/₁₆")
Max. 8 mm (⁵/₁₆")
Max. 20 mm (¾")
Max. 25 mm (1")
-
-
Max. 30 mm (1³/₁₆")
-
3
en