Focal iCub Guide D'installation page 14

14
Analog connection
Using an appropriate cable, connect
the outputs on the audio source to
the RCA inputs or 3.5mm mini-jack
on the iCub.
A quality cable offering adequate
shielding is recommended, especially
if a long cable is required between
the source and the iCub (Fig. D).
Digital optical connection
This connection is recommended
when possible to digital devices,
such as CD, DVD, computers,
digital portable devices, etc.
Such a connection avoids all possible
electronic or electromagnetic
distortion for the cleanest,
most dynamic listening without
degradation (fig. E).
Note: direct connection to a DVD
player requires an appropriate system
setting determined by the DVD player.
See your player's manual.
Note: In portable digital players,
the digital output is frequently the
3.5mm mini-jack standard. To connect
this device to iCub, use an adapted
cable 3.5mm mini-jack / Toslink or
an optical adaptor (fig. F).
Line out
R L
D
R L
E
F
iCub: user manual
R L
R L
Opt
Toslink adapter 3.5mm jack
Optical cable