Publicité
Les langues disponibles
Les langues disponibles
KEYPAD AND FUNCTIONS
1. Laser emitting window
2. Rotating head
3. Receiving window remote control
4. Handle
5. Vial for vertical application
6. Adjustment thumb screw for vertical
application
7 . Keypad
8. Support for vertical use
9. 5/8" thread hole vertical
10. Battery compartment lock
11. Battery compartment cover
12. 5/8" thread hole horizontal
OPERATION
Set-up the laser on a flat and even surface or mount onto a tripod.
Press the ON/OFF button (1) to power on the laser.
After POWER ON the laser automatically self-levels. The laser beam and the TILT LED (4) flash indica-
ting that the automatic self-levelling procedure is activated. This self-levelling procedure may take up
to 90 sec. When completed the TILT LED (4) is illuminated. The laser starts rotating at 800 rpm. If the
TILT LED (4) continues to flash and the alarm beep sounds the laser was most likely set up outside of
its self-levelling range of ± 5°. Re-position the instrument on more even surface.
1
3
Central 5/8" screw thread
EN
C
2
4
7
6
5
8
9
10
11
12
D
25
Publicité
