Error Codes - Kicker KEY200.4 Manuel D'utilisation

Error Codes

Beeps
Tweeter found, but the BI-
1
AMP switch is off
BI-AMP switch is on, but
2
there is no sound from a
channel
Auto Time Delay failed
3
- possible blockage or
disconnected speaker
4
Auto EQ failed
Front/Rear sensitivity
5
correction failed
6
Too much ambient noise
English
Reason Troubleshooting Action
Enable the BI-AMP switch
Make sure all wiring is properly
connected to the correct amplifier
channels.
Check speaker connections for
disonnected wire. Avoid physical
barriers. Possible faulty speaker.
Make sure Pink Noise is loaded
and playing on the head unit at an
adequately high volume.
Check speaker connections for
disonnected wire. Avoid physical
barriers. Possible faulty speaker.
Make sure any subwoofers are
disconnected, fans are off, engine is off,
windows are rolled up, doors are shut
and external noise is at a minimum.
19