IWC Schaffhausen PORTUGIESER CHRONOGRAPH CLASSIC Mode D'emploi page 20

— 2 0 —
R E A D I N G T H E C H R O N O G R A P H
Chronograph seconds hand: The scale for the central chronograph seconds hand
runs around the edge of the dial.
Minute and hour counters: The subdial at 12 o'clock has two hands, which run con­
tinuously and show the elapsed time on a 12­hour and a 60­minute scale. The hour and
minute counters can be read like a standard analogue time display. In other words, one
revolution of the minute counter is equal to 60 minutes, and one revolution of the hour
counter is equal to 12 hours.
U S I N G T H E C H R O N O G R A P H
Start: To start the chronograph, press the start/stop push­button.
Flyback: You can start recording a new time immediately, even when the chronograph
is running. Simply depress the reset/flyback push­button fully as far as it will go. All
three chronograph hands are reset to zero, and a new measurement is started as soon
as the push­button is released.
Stop: To stop the running chronograph, press the start/stop push­button.
Reset: Depress the reset/flyback push­button fully as far as it will go. This will reset
all the chronograph hands to zero.
Aggregate time recording: You can add stop times together by pressing the start/
stop push­button again after the first measurement instead of the reset/flyback push­
button.
P O R T U G I E S E R C H R O N O G R A P H C L A S S I C