Télécharger Imprimer la page

EUROM Nordic Manuel D'utilisation page 30

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 32
If this happens, turn the fireplace off by switching the main switch to O and remove
the plug from the socket. Leave the fireplace to cool down for at least 15 minutes
and remove the cause of overheating. You can then switch the fireplace back on.
If the device overheats again or you cannot ascertain the reason for this, take the
fireplace to your service point to be checked/repaired.
Important! For safety reasons the fire will not automatically restart after
overheating. Check whether conditions are safe before switching it on! So never
switch on the heater by means of a timer and never connect it to a power supply
that regularly switches on and off.
Cleaning and maintenance
Always remove the plug from the socket and let the fireplace cool down before
cleaning or touching.
The Nordic Fireplace atmospheric fireplace does not need much maintenance.
Always keep the in- and outlet openings clean and dust-free. Use a soft cloth or a
soft brush to clean the outside of the metal case. Do not use abrasive cleaning
fluids or special glass cleaners!
The fireplace contains no parts which need to be replaced by the user. If the device
malfunctions, immediately remove the plug from the socket and take to a service
point. Do not carry out repairs yourself and always ask for original parts to be used.
If the fireplace is to be stored after the winter period, clean it, pack it in original
packaging if possible and store in a cool, dry and clean place. Make sure the
fireplace is kept upright.
Problems and solutions
If the fireplace will not work check the electrical supply. Is the socket working
properly? Has the fuse blown?
The light is burning on the stove, but the stove does not provide heat? Check if the
thermostat on the stove is higher than the current room temperature.
If the fireplace stops working suddenly, it may mean that the overheating
safeguard has been triggered (see under 'Safeguards').
If the atmospheric lighting is not working or does not work properly, one or more of
the bulbs may need to be replaced (see 'Replacing a bulb').
In the event of other defects, immediately switch the fireplace off, remove the plug
from the socket and consult a supplier or recognised electrician. Never carry out
repairs yourself as this invalidates the guarantee and may be dangerous!
30

Publicité

loading

Ce manuel est également adapté pour:

363487363494