Lubrication - breviglieri MekFold 180 Manuel D'utilisation Et D'entretien

macchine agricole
Carefully read the warnings and precautions on the lubricant containers.

5.2 LUBRICATION

Lubrication of any machine with parts that turn and/or rub together is a vitally important task for the life and functionality of the
actual machine itself. Lubrication must therefore be carried out systematically and at the required intervals. The frequencies given
refer to machine use in a normal environment. If this machine is used in heavier duty conditions, it must naturally be lubricated
more frequently.
1. Oil drain plug
2. Grase load plug
3. Gearbox oil load plug
4. Greasing point
Gears housing:
COLUMBIA V.V. GEAR EP 460
Mekfold 180 version 340 .............................. lt 43
Mekfold 180 version 410 .............................. lt 50
Mekfold 180 version 460 .............................. lt 58
The indicated quantities correspond to a level about 1 cm below the upper edge of the gears in the casing when the machine is
on a flat surface.
Keep all lubricants well away from children's reach.
The operator should thoroughly wash himself after using lubricants.
Dispose of used oil in compliance with the anti-pollution laws.
180
MekFold
DANGER
- 32 -