Publicité
PREFACE
This Assembly Manual contains the infor-
mation needed to assemble the Yamaha
watercraft correctly prior to delivery to the
customer. Since some external parts of the
watercraft have not been assemblied at the
Yamaha factory for convenience of packing,
assembly by the Yamaha dealer is required.
It should be noted that the reassembled
watercraft should be thoroughly cleaned,
inspected, and adjusted prior to delivery to
the customer.
NOTICE
Because Yamaha constantly strives for
product improvement, the service specifica-
tions may be subject to change in the
future. If any change is introduced into the
specifications or assembly procedures,
Yamaha dealers will be notified by a techni-
cal bulletin.
IMPORTANT MANUAL INFORMATION:
Particularly important information is distin-
guished in this manual by the following
notations.
The
safety
ATTENTION! BECOME ALERT! YOUR
SAFETY IS INVOLVED!
WARNING
Failure to follow WARNING instructions
could result in severe injury or death to the
machine
operator,
bystander, or a person inspecting or repair-
ing the watercraft.
CAUTION:
A CAUTION indicates special precautions
that must be taken to avoid damage to the
watercraft.
NOTE:
A NOTE provides key information to make
procedures easier or cleaner.
Alert
Symbol
means
passenger(s),
SYMBOLS USED IN THIS
ASSEMBLY MANUAL
In order to simplify descriptions in assem-
bly manuals, the following symbols are
used:
: Coat with water resistant grease.
(Yamaha grease A, Yamaha marine
grease)
: Tightening torque.
: Provide clearance.
: Install so that the arrow mark faces
upward.
: Frontword of the watercraft.
: Made of rubber or plastics.
: Tighten temporarily.
: Apply locking agent.
LOCTITE
Size:
d/D : Diameter of part.
R
a
®
‚ No.242 (BLUE LOCTITE)
: Length of part.
E
Publicité
