Table des Matières
Publicité
Agitator ON-Off
Selector
Selector On-Off
del Agitador
Sélecteur On-Off
(marche-arrêt)
de l'agitateur
➢ ➢ If a clog prevents the normal flow of air to the motor, the thermal protector turns the
motor off automatically to allow the motor to cool in order to prevent possible
damage to the vacuum.
➢ ➢ During this time the headlight remains on.
➢ ➢ To correct problem, turn off and unplug vacuum, remove clogs, and/or clean/replace
filters.
➢ ➢ Replace full bag if necessary.
➢ ➢ Wait approximately thirty (30) minutes, plug vacuum in, turn on to see if thermal
protector has reset. Thermal protector will not reset if vacuum is not turned off even
if vacuum cools down.
Agitator On-Off Selector
Thermal Protector
- 20 -
➢ ➢ Selector should be placed in Off
position when using cleaner on bare
floors and when using tools.
➢ ➢ The agitator does not rotate in the Off
position.
➢ ➢ Selector should be placed in On
position when using cleaner on
carpeted floors.
➢ ➢ Light will remain on when vacuuming
with the selector in the Off position -
provided the vacuum is not in the full
upright position.
*The agitator will not rotate if the
vacuum is in the full upright position.
Publicité
Table des Matières
