brennenstuhl BR 1201 Mode D'emploi page 21

052609 Rauchwarnmelder BR 1201-0_052609 Rauchwarnmelder
BR 1201
IMPORTANT: After changing the battery, a
function test should be performed.
Testing Function
There is a test button on the front of the smoke
detector. Press the test button until the alarm
sounds. It will then stop after you release the tes-
ting button.
Note:
If the smoke detector malfunctions, please contact
our service department.
Maintenance and Care
In order to guarantee functional reliability of the
smoke detector, maintenance in compliance with
DIN EN 14676 must be completed at least once per
year. Proceed as follows:
– Remove dust from the smoke detector with a
soft cloth.
– If necessary, remove dirt with a damp cloth.
Do not use any cleaners.
– Test the device for proper function
(see „Testing Function").
– If you do not hear an alarm response,
the smoke detector must be replaced.
Operating Instructions
21