Card Remote Commander Rm-X114 (For Cdx-Gt225C/Gt222/Gt220); Rotary Commander Rm-X4S (Cdx-Gt225C Only) - Sony CDX-GT225C Mode D'emploi

* Be sure to use a straight type plug.
Adjust the volume level
Be sure to adjust the volume for each connected
audio device before playback.
1 Turn down the volume on the unit.
2 Press (SOURCE) repeatedly until "AUX"
appears.
"FRONT IN" appears.
3 Start playback of the portable audio device at a
moderate volume.
4 Set your usual listening volume on the unit.
5 Press the select button repeatedly until "AUX"
appears, and rotate the volume control dial to
adjust the input level (–8 dB to +18 dB).
Card remote commander RM-X114
(for CDX-GT225C/GT222/GT220)
The corresponding buttons on the card remote
commander control the same functions as those
on this unit.
DSPL
DSPL
*
MENU
SOURCE
</,
SEEK
(SEEK –/+ )
SOUND
OFF
OFF
VOL (+/ –)
12
AUX
AUX
Connecting cord*
(not supplied)
MODE
MODE
LIST
+
PRESET
+
DISC
m/M
(DISC
SOURCE
– +
SEEK
PRESET
+/ –)
–
DISC
ENTER
PRESET –
ATT
+ ATT
VOL
–
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
• DSPL (display) button
To change display items.
• </, (SEEK –/+) buttons
To control CD/radio, the same as (SEEK)
–/+ on the unit.
• SOUND button
The same as the select button on the unit.
• LIST button
To select PTY in RDS.
• M/m (DISC*/PRESET +/–) buttons
To control CD, the same as (1)/(2)
(ALBM –/+) buttons on the unit.
• ATT (attenuate) button
To attenuate the sound. To cancel, press again.
* Not available for this unit.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
Rotary commander RM-X4S
(CDX-GT225C only)
Attaching the label
Attach the indication label depending on how
you mount the rotary commander.
Location of controls
The corresponding buttons on the rotary
commander control the same functions as those
on this unit.
PRESET/
DISC
*
/
SOURCE
*
VOL
The following controls on the rotary commander
require a different operation from the unit.
• PRESET/DISC* control
The same as (1)/(2) (ALBM –/+) on the unit
(push in and rotate).
D S P L
SE L
M O D E
M O D E
S E L
D SP L
ATT
SEL
MODE
DSPL
SEEK/AMS OFF