Hitachi CJ 90VST Instructions De Sécurité Et Mode D'emploi page 15

WARNING:
NOTE: Accessories are subject to change without any obligation on the part of the HITACHI.
STANDARD ACCESSORIES
○ No. 41 Blade (Code No. 879357) ............................................................................................1
○ Allen wrench (Code No. 944458) ............................................................................................1
OPTIONAL ACCESSORIES.....
○ No. 1 Blade (Long) (Code No. 879227)
○ No. 1 Blade (Super Long) (Code No. 321878)
○ No. 11 Blade (Code No. 963390)
○ No. 12 Blade (Code No. 963391)
○ No. 15 Blade (Code No. 963392)
○ No. 16 Blade (Code No. 963393)
○ No. 21 Blade (Code No. 963394)
○ No. 22 Blade (Code No. 963395)
○ No. 31 Blade (Code No. 879356)
○ No. 97 Blade (Code No. 963400)
○ Guide (Code No. 879391)
○ Sub base (Steel) (Code No. 321994)
○ Sub base (Resin) (Code No. 321995)
○ Special screw (Code No. 321996)
(For installation of the sub base)
○ Bench stand (Model TR12-B)
○ Splinter guard (Code No. 321590)
○ Dust collection adapter (Code No. 321591)
NOTE: Specifi cations are subject to change without any obligation on the part of the HITACHI.
ACCESSORIES
ALWAYS use Only authorized HITACHI replacement parts and
accessories. NEVER use replacement parts or accessories which
are not intended for use with this tool. Contact HITACHI if you are
not sure whether it is safe to use a particular replacement part or
accessory with your tool.
The use of any other attachment or accessory can be dangerous and
could cause injury or mechanical damage.
sold separately
English
15