Light
Meaning
No coffee beans: fill the
beans container, then press
any button to reset the
alarm.
The grinding is too fine and
the coffee is delivered too
slowly or not at all. Adjust
the coffee mill (section "4.6
Adjusting the coffee mill")
Too much coffee has been
used. Select a milder taste
or reduce the quantity of
pre-ground coffee
Preparation
with
pre-
ground coffee has been
selected without placing
any pre-ground coffee in the
funnel. Make sure the funnel
is not blocked, then add one
level measure of pre-ground
coffee and repeat delivery.
• The milk container was
extracted during milk
delivery. Reinsert the
milk container: the ma-
chine is ready for use
again.
• The milk container was
extracted during coffee
delivery. Reinsert the
milk container: the ma-
chine completes prepa-
ration and delivers the
coffee.
→
Light
29
Meaning
•
A milk beverage has
been requested, but
the milk container is
incomplete or not in-
serted correctly: check
that the milk container
is complete with all
components correctly
inserted.
•
A milk beverage has
been requested, but
there is not enough
milk in the container
(see paragraphs "How
much milk to add to
make the directly se-
lected beverages?" and
"How much milk to
add to make My Latte?
").
Hot water has been request-
ed, but the spout is not
inserted: insert the water
spout.
The water circuit is empty.
Deliver hot water by
pressing the corresponding
button
→