Abus TVVR45021 Manuel Utilisateur page 122

Settings
Write Community Enter the "Key" according to the set-
tings of your SNMP software.
Trap Adresse Enter the IP address of the
SNMP manager
Trap Port Enter the trap port
(Default: 162)
Note
SNMP is used for monitoring the device status.
For this you need SNMP software not available
from ABUS.
Confirm the settings by clicking Apply and leave the
menu with Back.
More settings
Parameter Setting
Alarm Host IP Network address of the PC where the
CMS is installed
Alarm Host Port Port of your CMS Station
Server Port Port for data communication (Gen-
eral: 8000)
HTTP Port Port for web server (General: 80)
Multicast IP In order to minimize traffic you can
enter a Multicast IP. The IP address
has to match the IP address of the
PC running the CMS software.
RTSP Service RTSP-port
Port (Default: 554)
Note
Server port 8000 and HTTP port 80 are the stan-
dard ports for remote clients and remote Internet
browser access.
Note
With Alarm Host IP/Port you configure the address
of your CMS software. The CMS software is noti-
fied when there is an alarm, and performs various
reactions depending on the setting.
122