Helpful Hints And Tips; Care And Cleaning - IKEA MASTERLIG Mode D'emploi

ENGLISH
Heat setting Automatic switch off after
-
-

Helpful hints and tips

Cookware is suitable for induction
cooking zones if marked by the manu-
facturer.
When a cooking zone is switched on, it
may hum briefly. This is a characteristic
of all ceramic glass cooking zones and does
not impair either the function or the life of
the appliance.
Cookware sizes
Induction cooking zones adapt automatical-
ly to the size of the bottom of the cookware.
But, it must have a minimum diameter de-
pending on the size of the cooking zone.
Cooking zone
Right rear cooking
zone

Care and cleaning

Warning! Switch the appliance off and
let it cool down before you clean it.
Warning! For safety reasons, do not
clean the appliance with steam
blasters or high-pressure cleaners.
Warning! Sharp objects and abrasive
cleaning agents will damage the
appliance. Clean the appliance and
remove the residues with water and
washing up liquid after each use. Remove
also the remnants of the cleaning agents!
6 hours
5 hours
4 hours
Minimum diameter
of cookware base
[mm]
145
Heat setting Automatic switch off after
-
If cookware that is not suitable is used,
lights up in the display and after 2
minutes the indicator for the cooking zone
switches itself off.
Cooking zone
Left rear cooking
zone
Left front cooking
zone
Energy saving
• If possible, always place lids on the pans.
• Place cookware on the cooking zone be-
fore you switch it on.
• The bottom of the cookware should be as
thick and flat as possible.
Scratches or dark stains on the glass
ceramic that cannot be removed do
not affect the functioning of the appliance.
1.5 hours
Minimum diameter
of cookware base
[mm]
145
125
9