Whirlpool W10913497D Guide D'utilisation Et D'entretien page 31

Crisper Drawers
Counter Depth Models
To remove and replace the drawers:
1. Grasp the handle at the bottom of the drawer and slide the
drawer straight out to the stop. Lift the drawer off the bottom
guide.
2. Replace the drawer by placing it on the bottom drawer guide
and pushing it past the drawer stop into position.
To remove and replace the crisper cover glass:
1. Remove the platter pocket and the crisper drawers to access
the crisper cover glass.
2. Holding the glass insert firmly with one hand, press up in
center of the glass, and insert until it clears the plastic frame.
Gently slide the glass insert forward to remove.
3. Replace the crisper cover glass by placing the glass in the
center of the crisper cover frame. Slide the glass until it stops
at the back of the crisper cover, and lower the front portion of
the glass slowly into place.
To replace crisper(s) cover:
1. Remove the crisper pan, pull-out platter, and crisper glass
before removing the crisper.
2. Fit back of cover frame into supports on side walls of the
refrigerator and lower the front of the cover frame into place.
3. Slide rear of glass insert into cover frame and lower front into
place.
Full Depth Models
To remove and replace the drawers:
1. Grasp the handle at the bottom of the drawer and slide the
drawer straight out to the stop. Lift the drawer off the bottom
guide.
2. Replace the drawer by placing it on the bottom drawer guide
and pushing it past the drawer stop into position.
To remove and replace the crisper cover glass:
1. Remove the platter pocket and the crisper drawers to access
the crisper cover glass.
2. Holding the glass insert firmly with one hand, press up in
center of the glass, and insert until it clears the plastic frame.
Gently slide the glass insert forward to remove.
3. Replace the crisper cover glass by placing the glass in the
center if the crisper cover frame. Slide the glass until it stops
at the back of the crisper cover, and lower the front portion of
the glass slowly into place.
Replace Door-within-Door Bins
Install bins with the inner door closed and the outer door open on
the right side of the refrigerator.
1. Engage the side of the bin with the bigger tab to the front
and tilt it down.
2. Press the back side down and snap into place.
3. Bins need to be aligned and flush with the door.
Refrigerator Door Bins
The bins on your refrigerator door are adjustable to meet your
individual storage needs. The gallon-sized bins make it easy to
customize door storage to hold gallon containers.
31