Varnished And Enamel Surfaces; Ceramic Glass Surfaces - Wamsler W2-90 Instructions De Montage Et D'utilisation

After finishing cleaning, the heating and hob plates must be replaced correctly. The clean-
ing cover (4) under the oven needs to be closed tightly again.
After every period of heating you should check the stove thoroughly. If repairs or
replacements are necessary, please contact your supplier with the necessary article
Parts explosion diagram for Chapter 3.7 Care and cleaning:
3
Fig. 4
3.7.2

Varnished and enamel surfaces

Only wipe down the external surfaces when the stove is cold. Varnished surfaces should
only be washed with plain water (do not scrub). Enamel surfaces in special cases can be
cleaned with soapsuds or a bit of washing-up liquid and then wiped dry.
NOTE: Never use sponges, scouring products or any other chemical or abrasive
cleaning products!
3.7.3

Ceramic glass surfaces

Clean the window and/or Ceran plate before first use with a clean damp cloth. Then rub a
few drops of a ceramic glass protection product onto the glass / Ceran plate with a paper
towel.
After wiping this and polishing it dry, the high quality surface is now covered with an invisi-
ble film. The helps to keep the glass pane /Ceran plate clean and if repeated regularly,
makes it easy to clean.
PLEASE NOTE:
numbers and serial number in good time.
2
1
4
41
2
3