Setting (Resetting) Date And Time - Tanita BC-601FS Mode D'emploi

EN

SETTING (RESETTING) DATE AND TIME

Initial setting after batteries are installed
Press to turn on the unit and set the date and time. Use the / buttons to scroll through numbers.
Press SET to confirm.
1. Set Year (Applicable year: 2009 – 2050)
2. Set Month
3. Set Day
4. Set Hour (24 hour format)
5. Set Minute
Setting complete.
Resetting time
Press and hold (Clock) button for 3 seconds to turn on the unit.
Then follow the initial setting procedure step 1 to 5.
Note:
• If you change the date to a date prior to the current date, all tracking data for all users will be lost.
• Replacing the batteries will cause the loss of date and time settings.
• 60 seconds or more of inactivity will cause automatic shut off during this process. No data will be saved as a result.
• If you make a mistake or wish to turn the unit off before you complete the programming, press the OFF button to turn the unit off.
No data will be saved as a result.
• If you press (not press and hold) the (Clock) button, you can see the current date and time on the display.
4