Setting (Resetting) Date And Time - Tanita InnerScan V Mode D'emploi

SETTING (RESETTING) DATE AND TIME

1. Set Year
Insert batteries into the scale and then press the ON/OFF key to start the Year setting. Press the Up or Down
button to set year and then press the SET button. The unit will beep once to confirm.
2. Set Month
Press the Up or Down button to set month and then press the SET button.
The unit will beep once to confirm.
3. Set Day
Press the Up or Down button to set day and then press the SET button.
The unit will beep once to confirm.
4. Set Hour
Press the Up or Down button to set hour and then press the SET button.
The unit will beep once to confirm.
5. Set Minute
Press the Up or Down button to set minute and then press the SET button.
The unit will beep twice to confirm the programming.
The power will then shut down automatically.
Note:
After you replace the batteries or if you want to reset date and time, press and hold the Down button to begin the date and time
programming process. Replacing the batteries will cause the loss of date and time settings.
60 seconds or more of inactivity will cause automatic shut off during this process. No data will be saved as a result.
If you make a mistake or wish to turn the unit off before you complete the programming, press the ON/OFF key to turn the unit
off. No data will be saved as a result.
3