Taking Weight And Body Fat Readings - Tanita BC-601FS Mode D'emploi

EN

TAKING WEIGHT AND BODY FAT READINGS

1. Select Personal Data Number key and Step On
Using your toe, tap your pre-programmed Personal Key.
The unit will beep and the display will show the programmed data.
The unit will beep again and the display will show "0.0".
(You can change your height setting by pressing SET while "0.0" is shown. Specify
your height with /
Press SET to save the changed height, and then the unit will show "0.0" for ready to
measure again.)
Now pull out the hand-electrodes, hold with arms straight down and
step onto the platform.
Note: Remember no shoes or socks.
The unit will beep twice to complete the measurement.
Note:
• Please grip the handle-electrode as shown, using a light-firm pressure.
• Do not move until measurement is completed.
• If you step onto the platform before "0.0" appears, the display will show "Error" and you will not obtain a reading.
Furthermore if you do not step onto the platform within about 30 seconds after "0.0" appears, the power is shut off automatically.
• Keep your arms in straight up and down while making sure that you do not touch your legs or any part of your body with your arms
or hands.
Make sure all of your fingers contact
electrodes.
Make sure your feet contact all of the
electrodes.
.
Ensure that your arms are full
extended and your elbows do not
touch your body.
Do not bend your knees.
6