EINHELL CE-CP 18/180 Li E Instructions D'origine page 20

property and personal injuries arising as a result
of incorrect use.
If any other components or non-original
components are used on the machine, the
manufacturer's guarantee shall become void.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain residual
risks cannot be rules out. The following hazards
may arise in connection with the equipment's
construction and layout:
•
Contact with the unguarded wheel (injuries
through cutting)
•
Reaching into the wheel while it is still rotating
(injuries through cutting)
•
Catapulting of parts of the wheel (injuries
through cutting or bruising)
•
Catapulting of parts of the material being pro-
cessed (injuries through cutting or bruising)
•
Risk of fire from flying sparks
•
Damage to hearing if the compulsory hearing
protection is not used (hearing loss)
•
Inhalation of abrasive particles from the mate-
rial and wheel
•
Electric shock upon contact with non-insula-
ted electrical parts
If the instructions listed in the operating instruc-
tions are not adhered to, improper handling of the
equipment may result in other residual risks
4. Technical data
Operating voltage: .................................. 18 V DC
Speed n: .......................................500-3000 min
Polishing disk ∅: .................................... 180 mm
Connection thread: ...................................... M14
Protection class: ................................................III
Weight: .......................................................1,6 kg
Important!
The equipment is supplied without batteries and
without a charger and is allowed to be used only
with the lithium-ion batteries of the Power-X-
Change series!
Anl_CE_CP_18_180_Li_E_Solo_SPK9.indb 20 Anl_CE_CP_18_180_Li_E_Solo_SPK9.indb 20
GB
The lithium-ion batteries of the Power-X-Change
series are allowed to be charged only with the
Power-X charger.
Danger!
Sound and vibration
Sound and vibration values were measured in ac-
cordance with EN 60745-1, EN 60745-2-3.
L sound pressure level ..................... 71,7 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level ....................... 82,7 dB(A)
WA
K uncertainty ............................................. 3 dB
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with
EN 60745-1, EN 60745-2-3.
Operating mode: Sanding with sanding paper
Vibration emission value a
K uncertainty = 1.5 m/s
Operating mode: Polishing
Vibration emission value a
K uncertainty = 1.5 m/s
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
-1
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
•
Fit the handles and, if applicable, the optional
- 20 -
= 5,194 m/s
2
h,DS
2
= 4.275 m/s
2
h,P
2
03.07.2019 08:34:38 03.07.2019 08:34:38