Controls - Siemens TI3.3 Série Mode D'emploi

en Getting to know your appliance

Controls

By touching the fields, you can e.g.
select and start making a drink or adjust
the coffee strength.
Button Meaning
Switch the appliance on and off
k
The appliance rinses automatically when it is switched on and off.
The appliance is not rinsed if:
■
■
The appliance is ready for use when the LEDs of the buttons for selecting drinks light
up in the control panel. The appliance has automatic switch-off. ~ "Selecting
automatic switch-off" on page 18
espresso Dispensing Espresso
caffe crema Dispensing Caffe crema
or display navigation "¾" (back without saving).
cappuccino Dispensing cappuccino
or display navigation "V" (navigate down).
Dispensing latte macchiato
latte macchiato
or display navigation "ok" (confirm and save).
milk Frothing up milk
Coffee strength
%
Adjusting the coffee strength ~ "Adjusting beverage settings" on page 15
calc'nClean Start the service programme
Flashes when the service programme needs to be performed.~ "Calc'nClean
service programme" on page 23
Make 2 Espresso or 2 Caffe crema at the same time. Position the cups next to one
# another under the coffee dispenser.~ "Operating the appliance" on page 13
&
The fully automatic coffee machine has a cup warmer that can be switched on or off
manually with the button. When the cup warmer is on, the button lights up.
:
Risk of burns!
The cup warmer becomes very hot!
Note:
--------
10
it is still warm when switched on, or
coffee was not dispensed before the appliance was switched off.
Warning
For optimal cup warming, place them with the base on the cup warmer.