EIBENSTOCK EZW 125 Notice Originale page 17

Technical Data
Angle Grinder EZW 125
Rated voltage:
Power input:
Order Number:
Frequency:
Rated speed:
Max. disc diameter:
Max. disc thickness:
Spindle connection:
Protection class:
Degree of protection:
Net weight:
Interference suppression:
Content of Delivery
Angle Grinder EZW 125 with tool kit and operating instructions in a carton.
Application for Intended Purpose
The machine is intended for cutting and brushing metal and stone materials
without using water.
Safety Instructions
Safe work with the machine is only possible if you read
this operating instruction completely and follow the
instructions contained strictly.
Additionally, the general safety instructions of the leaflet
supplied with the tool must be observed. Prior to the first
use, the user should absolve a practical training
If the mains cable gets damaged or cut during the use, do not
touch it, but instantly pull the plug out of the socket. Never use
the tool with damaged mains cable.
The tool must neither be wet nor used in humid environment.
Safety Warnings common for Grinding, Sanding, Wire Brushing or
Abrasive Cutting Off Operations
This power tool is intended to function as a grinder, sander, wire
brush or cut-off tool. Read all safety warnings, instructions,
illustrations and specifications provided with this power tool. Failure to
follow all instructions listed below may result in electric shock, fire and/or
serious injury.
50 - 60 Hz
10 000 rpm
125 mm
6 mm
Ø 22.2 mm
II
IP 20
ca. 2,4 kg
EN 55014 and EN 61000
17
230 V ~
1400 W
06814000