Festool ETS EC 150/3 EQ Notice D'utilisation D'origine page 13

CAUTION
Operating noise
Damage to hearing

Use ear protection!
Vibration emission value a
directions) and uncertainty K measured in accor-
dance with EN 60745:
Vibration emission level
(3 directions)
The specified emission values (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary esti-
mates regarding vibration and noise loads during
operation.
– They represent the primary applications of the
power tool.
4 Technical data
Eccentric sander
Power
Idle speed
Sanding stroke
Sanding pad
Weight (without mains cable, with sanding
pad)
Safety class
5 Machine features
[1-1] ON/OFF button
[1-2] Speed control
[1-3] Sanding pad
[1-4] Plug it-connection
[1-5] Extractor connector
[1-6] LED for extractor signal
The specified illustrations appear at the beginning
of the Operating Instructions.
(vector sum for three
h
a = 4.8 m/s
h
K = 1.5 m/s
Increase possible for other applications, with other
insertion tools or if not maintained adequately. Take
note of idling and downtimes of machine!
3 Intended use
The sanders are designed for sanding wood, plas-
tic, composite, paint/varnish, filler and similar ma-
terials as directed. With mixed dust containing met-
al (such as dust resulting from paint sanding in the
automotive industry) and when sanding damp sur-
faces, special safety instructions must be followed.
The sanders are not intended to be suitable for
2
grinding bare metal. Material containing asbestos
2
cannot be processed.
The user is liable for improper or non-in-
tended use.
ETS EC 150/3 EQ
400 W
6000 - 10000 rpm
3.0 mm
D 150 mm
1.2 kg
/II
6 Commissioning
Unauthorised voltage or frequency!
Risk of accident

The mains voltage and the frequency of the pow-
er source must correspond with the specifica-
tions on the machine's name plate.

In North America, only Festool machines with
the voltage specifications 120 V/60 Hz may be
used.
Connecting and detaching the mains power cable -
see Fig. [2].
Before switching on the power tool, make
sure that the bayonet fitting at the mains ca-
ble is closed fully and locked.
ETS EC 150
ETS EC 150/5 EQ
400 W
6000 - 10000 rpm
5.0 mm
D 150 mm
1.2 kg
/II
WARNING
GB
13