tomado TM-6665 Mode D'emploi page 21

• Close the lid.
• Place the jug on the base.
• Insert the plug into the mains power socket.
• Switch the appliance on by pressing the on/off switch
under the handle downwards. The indicator lamp in
the on/off switch will light. The kettle will switch off
automatically as soon as the water boils.
• If desired, boil the water one more time. Wait for
at least 30 seconds, however, after the kettle has
switched off automatically.
• Pour the water slowly, so that any limescale particles
remain behind on the limescale filter in the pouring
opening. If the kettle is accidentally switched on whilst
empty, the boil-dry protection will automatically switch
it off.
• After use, remove the plug from the wall socket.
NOTE
• If the kettle is overfilled, boiling water may splash
over.
CLEANING AND mAINTENANCE
Warning
Before cleaning the appliance, always switch it off,
unplug it from the electricity supply and allow it to cool
down completely.
Cleaning
• Do not clean the appliance with an aggressive or
abrasive cleaner or with a sharp object, such as a
hard brush or a knife.
• Clean the exterior of the jug with a damp cloth.
• Always clean the base with a dry cloth.
• Take the limescale filter out of the pouring opening.
• Rinse it under running water.
• Reinsert the rinsed limescale filter in the pouring
opening.
Regularly descale the appliance. Depending on the
hardness of the water, scale deposits may become
attached to the inside of the appliance. The harder
the water, the more often it is necessary to descale the
appliance.
Descaling
• Use a descaling product intended for household
appliances (such as coffee makers).
• Follow the instructions on the package.
• Do not switch on the kettle during descaling. The
descaler should be applied in cold water.
• After descaling rinse the kettle a few times with clean
water.
STORAGE
Stow the power cord on the underside of the base. Store
the appliance in a dry place.
Instruction manual TM-6665
21