Signature SRT1000A+X Instructions D'utilisation page 25

If you also want to change the opening direction of freezer door inside,
please follow the instruction below:
1. Remove the one screw (1) and take away the lock button (2).
2. Remove the two screws (3) that hold the down axis cover (4) and take
away the cover (4).
3. Remove the door and place it on a padded surface to prevent
scratching it.
4. Remove the up axis cover (5) and transfer it to opposite position.
5. Turn the door for 180° and set it to the up axis cover.
6. Fix the down axis cover (4) with the two crews (4).
7. Fix the lock button (2) with the one screw (1)
5 5
2 2
1 1
3 3
4 4
figure 1 figure 2
Figure 1: Represents position of components prior to door reversal
Figure 2: Represents position of components after door reversal
-23-