Signature SRT1000A+X Instructions D'utilisation page 24

4. Remove the three screws (5) that hold the lower hinge (6) and make
DOOR REVERSE
sure to remove the lower hinge(6).
5. Remove the adjustable leg (8) and transfer it to right side.
6. Remove the bolt-pin (7) and reverse the direction of lower hinge (6).
Install the lower hinge (6) into left side with three screws (7).
7. Insert the bolt-pin (7) to the lower hinge (5).
8. Remove the hinge pin (9) that is in the bottom of door. At the other
side of door, insert the replacement hinge pin that is supplied with the
appliance.
9. Set the door to its place and make sure the door seat at the lower
hinge (6).
10. Fix the upper hinge (4) with the two screws (3) and the top with four
screws (1) (2).
8
9
figure 1
Figure 1: Represents position of components prior to door reversal
Figure 2: Represents position of components after door reversal
2
1
4
3
7
6
5
-22-
2
1
4
3
8
7
6
5
9
figure 2