Télécharger Imprimer la page

Domo DO7112S Mode D'emploi page 24

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
DRY IRONING
1.
Place the iron on the thermal insulation pads of the steam generator.
2.
Put the plug into the outlet. Select the desired temperature with the
temperature dial, according to the kind of fabric that needs to be ironed.
The iron will start to heat up. The temperature indicator light will light up.
3.
When the temperature indicator light goes out again, the selected
temperature has been reached. You can now start ironing.
4.
After ironing, place the iron on the thermal insulation pads. Turn
the temperature dial back to "MIN" to turn off the appliance. The
temperature indicator light will now go out. Pull the plug out of the socket. Allow the appliance to
cool down completely.
Caution: Never touch the hot soleplate!
STEAM IRONING
Caution: do not plug in the appliance yet at this point.
1.
Fill the water tank with water. Make sure that you do not exceed the maximum level (1,8 L). Use only
mains water or 50 % mains water and 50 % de-mineralised water if you have hard water.
2.
Close the filling opening of the water reservoir.
3.
Place the iron on the thermal insulation cushions. Put the plug into the
outlet. Set the temperature dial to the desired temperature, according to
the kind of fabric. The temperature indicator light will light up.
4.
When the temperature indicator light goes out again, the appliance has
reached the correct temperature.
5.
A continuous steam output will be emitted from the bottom.
6.
Use a steam boost to get rid of stubborn wrinkles. To activate this, hold down the steam boost
button on the inside of the iron handle.
Please note:
·
Do not touch the hot sole of the iron!
·
Never aim steam at people!
7.
After ironing, place the iron on the thermal insulation pads. Turn the temperature dial back to "MIN"
to turn off the appliance. The temperature indicator light will now go out.. Pull the plug out of the
socket. Allow the appliance to cool down completely.
IRONING TABLE
Use the dial to select the correct temperature for the correct material.
Symbol
24
DO7112S
Fabric
synthetic fabric/silk
wool
cotton
linnen
This symbol means that the article can not be ironed!
Temperature dial
70<T<120°C
100<T<160°C
140<T<210°C
170<T<225°C MAX

Publicité

loading