Installation Instructions; Unpack Grill - KitchenAid 740-0781 Instructions D'installation Et Guide D'utilisation Et D'entretien

Unpack Grill

Unpack Grill:
1. Remove all packaging materials and remove grill from the
shipping base.
2. Move grill close to desired outdoor location.
3. Open the grill hood.
4. Using an utility knife to cut yellow straps and packing tape
to open box from top and remove the boxes.
5. Remove the warming shelf and grill grates from inside the
grill and remove the package inside the firebox.
6. Remove foam block and wrap from inside the grill.
7. Replace the grill grates.
8. Place warming shelf on brackets as shown.
A. Warming rack brackets
B. Warming rack
9. Dispose of/recycle all packaging material.

INSTALLATION INSTRUCTIONS

Install 20 lb LP Gas Fuel Tank Tray
The tank tray should be secured to a fixed location that can be
easily accessed and will allow the gas pressure regulator/ hose
assembly to connect to the 20 lb LP gas fuel tank without
kinking or putting strain on the gas pressure regulator/ hose
assembly.
1. Place the tank tray in a location that can be secured using
4 screws (supplied) through the predrilled holes.
2. Use 4 screws to secure the tank tray. The typical location
for a 20 lb LP gas fuel tank is within the enclosure where
the tank can be turned on and off easily.
A. Four 5/32" x 10 mm truss head screws
10